User Manual

Ver1.0 June 7, 2016
Regulatory information for the OEMs and Integrators
The guidelines described within this document are provided to OEM integrators installing
5G module in notebook and tablet PC host platforms. Adherence to these requirements is
necessary to meet the conditions of compliance with FCC rules, including RF exposure.
When all antenna type and placement guidelines described herein are fulfilled the 5G
Module may be incorporated into notebook and tablet PC host platforms with no further
restrictions. If any of the guidelines described herein are not satisfied it may be necessary
for the OEM or integrator to perform additional testing and/or obtain additional approval.
The OEM or integrator is responsible to determine the required host regulatory testing
and/or obtaining the required host approvals for compliance
. 5G module are intended for OEMs and host integrators only.
. The 5G Module must be operated with an access point that has been approved for the
country of operation.
. Changes or modification to 5G Module by OEMs, integrators or other third parties is not
permitted. Any changes or modification to 5G Module by OEMs, integrators or other third
parties will void authorization to operate This module is not masked, and the end user
needs to increase the mask.
Information to Be Supplied to the End User by the OEM or Integrator
The following regulatory and safety notices must be published in documentation supplied
to the end user of the product or system incorporating the Amplified 5G Module, in
compliance with local regulations.
Host system must be labeled with "Contains FCC ID: YWTGWF-5M01 ", FCC ID displayed
on label.
The 5G Module must be installed and used in strict accordance with the manufacturer's
instructions as described in the user documentation that comes with the product. Intel
Corporation is not responsible for any radio or television interference caused by
unauthorized modification of the devices included with the wireless adapter kit or the
substitution or attachment of connecting cables and equipment other than that specified
by Intel Corporation. The correction of interference caused by such unauthorized
modification, substitution or attachment is the responsibility of the user. Intel Corporation
and authorized resellers or distributors are not liable for any damage or violation of
government regulations that may arise from the user failing to comply with these
guidelines.
This device has been evaluated and shown compliant with the FCC RF Exposure limits
under fixed exposure conditions (antennas are greater than 20cm from a person’s
body)when installed in certain specific configurations.
The host system shall have a label showing: Contains FCC ID: YWTGWF-5M01
This product only used external antenna, The gain of antenna : -1.0dBi
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna