User's Manual

①
②
③
Buttons
①
②
③
①
②
③
④
5
Remote Control
4
Input Interfaces
MUTE
MODE
EQ
Volume -
Pause/Play
USB-Next music
Volume +
USB-Pre music
Repeat Play:
Switch to enter LINE
IN/Bluetooth/USB mode
MODE：
Switch to change EQ
Switch to Power on/off
MODE
EQ
USB
Prepare one piece U disk with MP3 music inside.(Not included in the accessories).
1.Plug in the power cable, LED display indicated by red light;
4.Ensure Mp3 songs available in the U disk
6.USB play control by remote control only, Pause/Play: , Pre/next: ;
Repeat: Press once for single song repeat and twice for All songs repeat.
3,Inset U-Disk to USB insterface, the soundbar enter USB mode automatically,
display by ;
5.Your device can play music via the soundbar now.
Initial pairing your bluetooth device.
1.Plug in the power cable, LED display indicated by red light.
Bluetooth
3.Using the native controls on your bluetooth device, search and select the soundbar paring
name ''GD19' in your bluetooth settings to pair.
7
4. When successfully paired and connected, the LED display indicated by solid .
After initial pairing, the soundbar will stay paired unless unpaired manually by user or erased
due to a reset of the device.
If your device should become unpaired or you find it unable to connect, repeat the above steps.
6
Prepare a Line In cable（Availabe from the accessories）
1.Plug in the power cable, LED display indicate by Red light;
2.Long press the power button on the control panel or short press the power button on
remote control to power on the soundbar, red light turn off and display by flashing ,
3.Inset 3.5mm audio cable to LINE In interface, the soundbar enter Line In mode
automatically, display by ;
4.Ensure the audio sourcing in the status of line in working;
5.Your device can play music via the soundbar now.
LINE Input
One/All Music repeat play
(USB Mode Only)
the soundbar enter to Bluetooth Mode(Default mode)
2.Long press the power button on the control panel or short press the power button on
remote control to power on the soundbar, red light turn off and display by flashing ,
the soundbar enter to Bluetooth Mode(Default mode)
2.Long press the power button on the control panel or short press the power button on
remote control to power on the soundbar, red light turn off and display by flashing ,
the soundbar enter to Bluetooth Mode(Default mode)
5. Short press POWER button to cancel current bluetooth pairing, it will automatically repair
bluetooth device if the bluetooth is not close.
①
②
③
DC IN：Power Adaptor Input
Line In Jack：Connect the soundbar and LINE out device by 3.5mm audio cable
USB Interface：MP3 music playback (support max 32GB U-disk),Software update
④
Volume - ：Short press to next music, long press to reduce the volume
Volume +：Short press to previous music, long press to increase the volume
Pause/Play：Short press to Pause/Play the music
Power/Model：Long press to Power on/off the soundbar, short press to switch
among BT,USB and LINE INmodel
DC IN
①
②
③
④
⑤
⑦
⑧
⑨
⑩
⑥
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩