Data Sheet

XY-MBA32A Bluetooth
Module
Data
sheet
33
www.newbitsiot.com
10 Revision History
Revision Description of changes Approved Revision Date
V1.0 Initial Release Allen 2021.11.05
V1.1 Adding Recommended Circuits Allen 2022.04.25
Notes:
Due to the continuous improvement of the hardware and software of the product, this document
may be changed without further notice, and the latest version of the document shall prevail in the
end.
For the latest information, please go to the website: www.newbitsiot.com to download, or contact us.
Important Note:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another
transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In
these circumstances, the OEM integrator will be responsible for re‐evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
Radiation Exposure Statement:
This module support BT(2402-2480MHz) which compliance with part 15.249 and apply for single module approval .
The module is limited to OEM installation only.
The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module.
OEM integrator shall equipped the antenna to compliance with antenna requirement part 15.203& 15.204 and must not be co-
located or operating in conjunction with any other antenna or transmitters. And OEM host shall implement a Class II Permissive
Change (C2PC) or a new FCC ID to demonstrate complied with FCC standard.
The OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this
module installed.
The final end product must be labelled in a visible area with the following: “Contains FCC ID:2A8QD-XYMBA32A”
ANT
The antenna is PCB antenna, and is permanent connection antenna. the antenna is -0.68dBi,This antenna is permanently paired
with a product to sell. ( Only antennas of the same type and with equal or less gains as shown below may be used with the The
Bluetooth module. Other types of antennas and/or higher gain antennas may require additional uthorization for operation)
Module operation instructions
1. According to the following requirements of the power supply, power up, about 3 seconds to to complete the initial。
2. Iphone/Android mobile phone BT function to open, search to the corresponding Bluetooth module name (name can be
changed according to customer production requirements), click the name of the BT and select the connection.
3. open application software (need to install the company's specific application software development, application software
interface can be customized according to customer's product requirements), click on the interface to see the scene。