Parts and Accessories List

product description:
Combining a wireless dog fence and a remote trainer in one, this product offers the convenience of wirelessly
controlling your dog without the hassle of burying electronic wires. From the fence controller box, you can
instantly send a corrective signal (beep, vibration or shock) to train your dog. You can use it indoors or
outdoors.
How it works (wireless fence):
1. The receiver does not work within the set distance, beyond the range it will work as follows.
2. When the dog is not within the range, the working mode of the receiver is as follows (the indicator light
flashes when working)
1). sound for 5 seconds;
2). Vibrate for 5 seconds;
3). The sound and vibration last for 6 seconds at the same time;
4). Electric shock for 5 seconds;
5). Both the sound and the shock last 6 seconds.
3. After 5 consecutive working modes, it will always sound di-di-di. until the receiver returns to within the set
distance.
4. After the second no signal, there will be a delay of about 3-5 seconds to work.
Operation method:
Turn on the fence controller and press the MODE button. This will allow you to choose between "Fence" mode
or "Trainer" mode. If you see 1-100 steps adjustable on the screen, it means it is in wireless fence mode. If you
see 001, 002 or 003 on the screen, it is in Trainer mode. Please read below about Wireless Fence Mode and
Trainer Mode.
Wireless fence mode:
Press the receiver's power button to turn it on. Press the power button again to turn it off. The receiver
automatically works with the fence controller, no pairing required. Adjustable from 1-100 steps, adjust the
required distance according to the place you are using, the maximum distance is about 300 meters, you can
always adjust by pressing the minus "-" and plus "+" buttons. When you're in a safe zone, the receiver won't
react until you reach the warning zone, the receiver will make a beep-beep-beep sound and a red light will
flash. When it exceeds the set range, the receiver will automatically start working mode. (See Operating
Modes in "How It Works.") When you return to the safe area, the receiver will be silent and the red light will
stay on.
One fence controller box can be used with multiple collars, and you can add as many collars as you want to use
the wireless fence feature.