User's Manual

Receiver using guide
1. Receiver is water proof and rechargeable, the metal probes can be replaced
according to dog’s hair length. If receiver does not work within 5 minutes, will
enter into dormant state, Touch the receiver, it will be awakened.
2. Press power button 1 second, receive will be turned on, power light will be on
always, Press power button gently, receiver will be turned off.
3. LED testing light used for testing shocking, testing light on means shocking
function is working.
can be used as wrench to fix metal probes.
Charging:
1. Transmitter is rechargeable with DC 5V, 2500mah lithium battery, LED will display
000 flashing When low battery, please charge in time, usually 4-5 hours for full charge.
After full charge, the red light will be on always, please use the original charger.
2. Receiver is rechargeable with 5V 400mah lithium battery, taking 1-2 hours for
full charge and then be used for about 500 times. Receiver 5V low battery
reminder: indicator light flashing, please charge in time, after fully charged, the
green light will be on.
Attention:
 It will affect distance and using when low power.
 Please keep the Transmitter always power on, if not, the receiver will go to
working mode, shock your dogs two times, and bi-bi-bi always.