User's Manual

Wireless fence using guide:
1. Support 5 dogs in maximum, the biggest straight line radius is 984ft /300M for
wireless fence and as center of the transmitter.
2. When dog exceed the setting range, receiver will start working mode
automatically. (refer to the working modes at “Working Principle” ).
3. Please keep the Transmitter always power on, if not, the receiver
will go to working mode, shock your dogs two times, and bi-bi-bi always.
Dog training using guide:
1. The biggest straight line distance is about 300 meter for dog training collar.
2. 3 dogs can be remote controlled mean while, LED display “001”Means the first
dog, “002”for the second dog,“003”for the third dog，
3. Independent “sound”，“vibration”，and“shock”3 function for options. Each
function has 1-6 levels for adjusting, press “+”“-”for adjusting。
4. each function will keep the former operation, if you choose 6 for sound function,
the sound level will keep 6 when you restart device, please press “+” or “–”to
adjust .
How to pairing Transmitter and Receiver
1. Fully charge and power on;
2. Press "+" or "-" to choice paring which Receiver (001,002 or 003) ;
3. Press transmitter panel “MODE” button for 3 seconds until the LED flashing,
then press the receiver power button for 3 seconds, after pairing successfully,
LED and receiver indicator light will be on always.
4. Use test method to test is connected or not ; (please see “How to Test”)