User's Manual

Working Principle:
1. Receiver will not work among setting distance, will work as below when exceed
the range.
2. When dog not in the range, Receiver working modes as below: 1--2--3,
(indicator light flashing)
1) Sound 5 seconds
2) Shock 5 seconds
3) Sound& shock at same time for 6 seconds
3. After 2 cycles of working modes, it will launch di-di-di sound always. The
receiver will not work until the dog return to the setting distance range or press
power Off.
4. After 5 minutes of static, it will enter standby mode.
Function Operation:
1. When “30/60/90/150/300” displayed on screen, it is in wireless fence mode. press MODE
button switch to dog training mode, in dog training mode, LED display “001”or “002” or “003”
means for 1,2,3 dogs.
2. In dog training mode can remote control 3 dogs at same time, press ‘+’ or ‘-’button to
change control which dog. There are 3 functions on the right of the panel: sound, vibration, shock.
3. Each function has 1-6Intensity levels. Lower Number means lower power, the
bigger of number ,the stronger of the power, press ’+’ or ‘ -' for adjusting.