User's Manual

Attention：
Wireless distance means the straight line distance in opened space, it will be
affected by electromagnetic wave or barriers surrounding.
Transmitter need 3.7v lithium battery, 2500ma for power supply: voltage lower 3
volt ,led display 000,please charge in time, red indicator light will flash when
charging, after full charged ,the indicator light will be in red on.
Receiver：lithium battery 3.7V voltage，400mAh
1. Put the accessories on receiver, put 2 touch probes on receive screw. （there are 2
kind of probes, short probes suit for small dog, long probes suit for middle and big dogs)
then make the TPU belt through the back of receiver and 2 holes.
2. turn on/ turn off receiver power, press ON / OFF button, turn on receiver, will hear
short sound “di”，red LED will light on. If transmitter turned off, receiver will have sound
“di…di”，turn on transmitter ,the red light of receiver will light on and under stand by
status.
3.Receiver charging：
When Receiver voltage lower 3volts,power indicator light in red and flashing which
Means receiver in low power and please charge in time, it will take 2-3 hours for full
Charge and after full charged, indicator light will be in green
attention：please charge at least 3 hours for first charge
4.receiver is with waterproof function, so it can be used for raining day, dog collar with
TPU reflective light material can be use at night and easily to find pet.
3. REMINDING：Receiver will enter into sleep and power saving mode, when act it
will be awakened automatically.
USING PRODUCT：
1. Put the receiver on dog neck not so tight
2. Connect power, press the ON/OFF button on transmitter：use + / - button，setting