User's Manual

Neo_N703 WCDMA ModuleDemo Board User Guide

1.4 Requirements for the PC

To use the N703, the PC must meet the following requirements:

 Windows 2000 SP4, Windows Xp SP2, Windows Vista, Windows 7-10 and Linux 2.6.18 or above.

 The hardware of your PC must meet or exceed the recommended system requirements for the

installed version of OS.

 Display resolution:800*600 or above.

 At lest one WWAN Mini PCI Express interface or one USB interface .

To use the N703, the MCU must meet the following requirements:

 At lest one USB interface or one Uart interface.

2 Using N703 with Mini PCI Express Board on PC

○

1 Screw holes

○

2 Main antenna

○

3 N703 Module

○

4 Mini PCI Express connector

Installing the N703 Mini PCI Express Board on the Main Board of the PC

Step 1 Insert the mini PCI Express connector of the N703 into the WWAN Mini PCI Express

interface on the main board of the PC.

Step 2 Press downward to fic the N703 in the module slot.

Step 3 Use a screwdriver to fix the N703 onto the main board of the PC with two screws provided in

the packing box

Step 4 Insert the connector of the main antenna into the Main antenna interface of the N703 Mini

PCI Board.