User Manual

Product Introduction
Siren alarm is an intelligent device that can be controlled remotely by the radio frequency. Siren alarm
send messages via Z-wave network to the Z-Wave main controller. In the Z-Wave network
communications, Siren alarm can be connected to any Z-wave main controller, Different countries or
areas, the radio frequencyof the Z-wave network is different.In the communication between the Siren
alarm and Z-wave main controller, the siren alarm can both send and receive messages. When press
the code button of siren alarm, it will send message to the Z-wave main controller, the Z-wave main
controller can display the on/off status of the siren alarm; when the siren alarm receives messages
from theZ-wave main controller, the siren alarmwill be triggered. The siren alarm is battery powered,
small and easily install. When sirenalarm is working, LED light will flash, and there will be alarm
sound at the same time. The sound is not lower than 90 decibels.
Technical parameters
 Power supply:CR123A-1500mAh X 2
 Stand-by time: 1 year
 Radio Frequency: 868.4MHz EU; 908.4MHz US
 Compatible with 300 series and 500 series
 Easy installation on wall or any surface
 6 sound can be select
 Range: up to 70m outdoor
up to 50m indoor
 Radio Protocol: Z-wave
 Sound intensity:>90 dB
 Operation temperature: 0-40
℃
 Storage temperature:0~60
℃
 Dimension:(D x W x H):70mm x 68mm x 31mm
Technical Information
 When the siren alarm triggered, it will make alarm sound and LED light flashat the
same time.
 When the other sensor is triggered, the siren alarm can associate with the
sensorsthrough the Z-wave network.
 Siren alarm can be controlled remotely via mobile phoneApp.
 Compatible with any Z-Wave main controller.