Operation Instruction

6. Indicator ON and OFF
Open the APP and enter the monitoring menu, click the screen to display several
control buttons at the upper part of the screen. Click the indicator icon to
control the ON and OFF of the indicator.
7. Night vision light ON and OFF
The night vision lamp icon is at the right side of the indicator icon, click the night
vision lamp icon to control the ON and OFF of the night vision lamp.
8. Reset
The device can be reset when there's fault, and then recover to the factory settings
status. Reset is necessary to change the device from IP remote connection to AP
local connection. Hold the Reset button for 5s, the red and blue indicators turn off,
and then the device will recover to the factory settings status. After resetting, the
machine will automatically restart. After recovering to the factory settings status,
various settings of the device shall be set again, and WIFI connection shall also be set
again.
II. Install APP software
Android and ISO users may scan the QR code to select corresponding software
download APP, to download and install APP.Mobile phone desk will display the APP
icon (PIC 1)
PIC 1
III. WIFI connection method
Before connecting WIFI, please ensure the device is under full electricity, or connect
it with external power supply. Under low power condition, it will cause unstable WIFI