Operation Instruction

ManualsBrandsShenzhen Nello Electronics Technology ManualsCamera & PhotoMINI CAMERA

product operation instruction

Red indicator: WIFI indicator, red indicator turns on after enabling WIFI,red indicator

turns off when WIFI is disabled, red indicator flashes slowly under AP mode, red

indicator keeps on under IP mode, red indicator flashes quickly if the device WIFI is

not connected with the router.

Blue indicator: Video/Photo indicator, blue light flashes slowly under video mode,

blue light flash once when taking one photo.

Charging: the device can be charged under ON or OFF status, the red and blue

indicators are the working indicators of the device, the device doesn't have

independent charging indicator under charging status. It requires about 3 hours to

charge the device full. The device can work continuously for about 1h after charging

full, please connect it with external power supply if it requires working for a long

period. Standard 5V 1A adapter shall be adopted for connecting external power

supply.

Please select the Micro-SD card for C6 or above version as the TF card of the device.

I. Introduction to the product functions

MINI 814

Summary of content (5 pages)

PAGE 1
product operation instruction MINI 814 Red indicator: WIFI indicator, red indicator turns on after enabling WIFI,red indicator turns off when WIFI is disabled, red indicator flashes slowly under AP mode, red indicator keeps on under IP mode, red indicator flashes quickly if the device WIFI is not connected with the router. Blue indicator: Video/Photo indicator, blue light flashes slowly under video mode, blue light flash once when taking one photo.
PAGE 2
1. Start/Shutdown Turn the Power switch to the ON position to boot the device, the red and blue indicators keep on. Then the devices starts initialization, the red and blue indicator turn off and then keep on, and initialization will be completed after about 30 seconds after the start-up. The blue indicator keeps on and red indicator flashes after the device has entered into the working standby status (default is the AP connection mode, the blue indicator keeps on and the red indicator flashes.
PAGE 3
6. Indicator ON and OFF Open the APP and enter the monitoring menu, click the screen to display several control buttons at the upper part of the screen. Click the indicator icon to control the ON and OFF of the indicator. 7. Night vision light ON and OFF The night vision lamp icon is at the right side of the indicator icon, click the night vision lamp icon to control the ON and OFF of the night vision lamp. 8.
PAGE 4
signal, which may affect the WIFI connection and normal use of the device. 1. AP local connection (LAN) Step 1: after booting, the device enters initialization, and initialization will be completed about 30s later. Blue indicator keeps on and the red indicator flashes. Step 2: After initialization, open the mobile phone WLAN to select the WIFI hotspot CM *** (24-digit WIFI name) and click Connect.
PAGE 5
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.