User Manual

Cleaning and Maintenance
Always unplug the power cord from the power outlet before cleaning.
 Wipe with a dry cloth to clean and get rid of dust on a regular basis.
 Do not immerse or clean the product with water or liquids.
 Avoid contact with sharp objects and corrosive chemicals.
 Please store in a dry and cool place if not in use for a long period of time.
Troubleshooting
Q: How to know if Wi-Fi is connected?
A:
- If the Wi-Fi is connected, the Wi-Fi indicator goes off.
- Only the lamp is connected to Wi-Fi, you can control it with the APP.
Q: Can I connect to multiple smart products at the same time?
A: You can connect to multiple Miroco smart products including DL005 at the same time.
Q: If power fails, will it connect to the configured Wi-Fi automatically after power on again?
A: Yes. But if the lamp is connected to a new device, you need to configure Wi-Fi again.
Q: What are the system requirements for the mobile phone?
A: Android 8.0 or later, iOS 10 or later.
Q: If I set up the light as I want, can I save it?
A: Yes. You can save it as a scene on the APP. If you set it up and turn off the lamp, it will
memorize and resume the settings before you turn it off.
Q: After using for some time, the lamp is getting hot.
A: The lamp beads will generate energy while working, so it is normal if it gets a little hot.
Schedule
Settings
Timer for turning on the lamp
Click “Add Scene” to
add a new scene
Timer for turning off the lamp
Select a preset scene, or
tap Edit to set up current
scene