User's Manual
Table Of Contents
- 1 Product Overview
- 2 Demo Operational instructions
- 2.1 About Demo Software
- 2.2 Demo System Requirements
- 2.3 technical terms
- 2.4 Demonstration software operation
- 3 Packaging and Storage
- 4 Services and Support
User’s Manual
16
2.4.6 Antenna Port Power Configuration
The antenna power is at the bottom left of the window. As shown in Figure
9, the reader antenna power can be obtained by clicking“Get”. Click“Set”
to set the reader antenna power.
Figure 9： Antenna Port Power Configuration
Check the corresponding antenna port (the external antenna has been
connected), select the corresponding power value from the list of power
values, click Settings, and pop up the prompt box for successful
configuration.
2.4.7 Frequency Hopping Management
Select frequency hopping in the left menu bar of the RFID configuration,
as shown in Figure 10. Select“FCC902-928MHz”in the“Frequency”drop-down
list as shown in Figure 11, from the left frequency list box, click“ ”
the button and import it into the right list box, then click“Set”to