User's Manual
Table Of Contents
- 1 Product Overview
- 2 Demo Operational instructions
- 2.1 About Demo Software
- 2.2 Demo System Requirements
- 2.3 technical terms
- 2.4 Demonstration software operation
- 3 Packaging and Storage
- 4 Services and Support
User’s Manual
13
2.4.4 Equipment configuration
The Demo main interface chooses“Device Control”->“Device Configuration”
and pops up the“Device Configuration”dialog box, as shown in Figure 6.
Figure 6： Equipment configuration
The upper left of the window is the serial port parameters. As shown in
Figure 7, click “ Get ” to get the serial port communication baud rate
parameters of the reader, and click“Set”to set the serial port communication
baud rate of the reader. The baud rate is 9600 bps, 19200 bps, 115200 bps,
230400 BPS and 460800 bps. Others do not support it. The default reader is
115200 bps.