User Manual

Steps to connect the bluetooth headset to mobile phone
1.Long press the multifunction key (about 6.5s) when the headset is off until the red light and blue light of the headset
flashes alternately and enters the status being searched.
(After hearing the prompt "get access to pairing mode", it can be searched by other bluetooth device).
2.Turn on the bluetooth of the mobile phone. Click to search for bluetooth device until the mobile phone detects the
signal of the headset. The model of the headset will be displayed.
3.Click the headset model for connection. After being connected successfully, the indicator light of the headset will be
showed as blue light flashing at intervals with a voice prompt "Successful pairing" and "Connected" Note: While at
pairing, please keep the headset within a range of 1m away from the mobile phone to ensure successful pairing.
4.Most of mobile phones do not need to input the password to complete pairing. If it is required, please input the
password on the mobile phone: 0000 (the initial password for all models is 0000).
To this step, congratulations! You have completed the connection successfully, and you can enjoy music and making
calls now.
Connection steps for two-in-one mobile phones
1.Long press the multifunction key (about 6.5s) when the bluetooth headset is off until the red light and blue light of the
headset flashes alternately and enters the status being searched.
2.Turn on the bluetooth function of mobile phone#1 and search for the headset name among the displayed bluetooth
devices. Click it to complete connection.
3.Long press the multifunction key of the headset until the red light is on. Turn off the headset as well as the bluetooth
function of mobile phone#1.
4.Long press the multifunction key (about 6.5s) once more until the red light and blue light of the headset flashes
alternately and enters the status being searched.
5.Turn on the bluetooth function of mobile phone#2 and search for the headset name among the displayed bluetooth
devices. Click it to complete connection.
6.Turn on the bluetooth function of mobile phone#1 and search for the headset used before. Click it to complete the
connection to two-in-one mobile phones.