Users Manual

Method2:Putthedetectortosuitableplace.
Putin3*AAbatteries.
InstallationInstructions
Networksettingnote:
Pressthebuttonfor5s-10s,whensignaliconflashes,
releasethebuttonfornetworksetting.Itwilllastfor
60sfornetworksetting,andthesignaliconkeepson
flashing.Ifpressingformorethan10s,networksetting
iscanceled.
Ifsucceeds,signaliconison;Ifnot,signalicon
disappears.settingiscancelled.
WiFisignal
Method 1 fix one screw to the wall,alignthedevice :     
screwholetoscrew.
Screwhole
AppDownload
1.Searchfor“ SmartLife”inAPPStoreorGooglePlay
Store.Or,scanthebelowQRcodetodownloadthe
APP.
Scantodownload
SmartLifeAPP
WiFiTemperatureandHumidity
DetectorUserManual
Temperature
Humidity
Batterylevel
Resetbutton
Batteryslots
Batterycover
1.Powerontheproduct.
NetworkSetting
ProductDescription
Slidedowntherear
covertoopen.
2.Presstheresetbuttonfor5s,thesignaliconflashes,
thedetectorisinnetworksettingstatus.
Pressthebuttonfor5s.
1.PowerontheWiFidevice;
2.Makesurethenetworkindicatorflash(ifnot,long
pressresetbuttonuntilindicatorflashes.)
3.OnApphomepage,click"+"ontoprightcorner;Click
"Security&Sensors"ontheleftsideofthepage,and
selecttherightWiFisensortypetoadddevice;
4.Ifsuccessfullyadded,devicewillbein“ Myhome”list.
NetworkSetting
Attention:
1.Whenthedetectingenvironmentchangesrapidly,
suchasmovefromoutdoortoindoor,thenthedevice
needsabout20minutestodetectnewenvironment.
2.Ifthedeviceishandheld,humanbodytemperature
willaffectthedetectorreadings.
3.Makesurethattheairholeisnotblocked.