Wiring Diagram

Daylight Priority
Note：Lux-Of
f sampling time--10s；
Lux-Off sampling time--10s；
Lux-On function takes effect only when standby dimming
period set at +∞.
Lux of
f
light on automatically
Sampling time
light off automatically
Lux on
Sampling time
With suf
ficient daylight, even
when motion detected, light
remains OFF.
Light automatically on and dim
to the stand-by dimming levle
when ambient brightness is
lower than preset lux level.
With insufficient ambient
brightness, light dims to 100%
when motion was detected .
Light keeps on 100% within the
holdtime.
Light off when ambient lux level
is higher than preset lux amount
even there is still motion.
Light dims to standby level if no
motion detected after holdtime.
Application
Daylight priority
Thanks for the Dual-PD technology
, The sensor can
tell the difference between natural light and artificial
LED light, the sensor will turn on your light fixtures
when the ambient light is lower than the setting value
even there is no any motion was detected. When the
ambient light is up to the setting value, the sensor will
switch off the light fixtures even there is still motion.
Lux-On function takes effect only when stand-by dimming period set at +∞.
① ③
④
②
⑥
⑤
⑥
- 02
Focus on Intelligent lighting
Model：
MS009ER
Shenzhen Mosentek Technology Co.,Ltd. Add: Building No. 3, Room 202, Shanmen community No. 3 industry park, Yanluo street, Baoan district, Shenzhen, P.R.C.
Email: [e-mail] Tel: [phone]
Detection coverage
4m
Mounting
height
5m
Ceiling Mounted
6m
7m
8m
3m
1m
2m
0m
1m 2m 3m 4m 5m 6m1m2m3m4m5m6m
Wall Mounted
1m 2m 3m 4m 5m 6m 7m 8m 9m 10m 12m 13m11m 14m 15m
3m
4m
4m
3m
2m
2m
1m
Mounting
height
1m
Sensitivity :
25% 50% 75% 100%