Model：MS009ER Focus on Intelligent lighting 10mm thickness super compact sensor Shenzhen Mosentek Technology Co.,Ltd. Add: Building No. 3, Room 202, Shanmen community No. 3 industry park, Yanluo street, Baoan district, Shenzhen, P.R.C. Email: sales@mosentek.
Focus on Intelligent lighting Model：MS009ER Features Super compact sensor module W*L*H 18.5*42*10mm Remote control setting 5V PWM dimming control Daul PD for auto lux on/off Technical data Input Output Sensor Parameters Operating voltage 12VDC Operating current ≥40mA Output 5V PWM Microwave frequency 5.8GHz±75MHz Microwave power <0.
Focus on Intelligent lighting Model：MS009ER Detection coverage Wall Mounted Ceiling Mounted 6m 5m 4m 3m 2m 1m 0m 4m 1m 2m 3m 4m 5m 6m 3m 1m 2m 2m 1m 3m Mounting height 1m 2m 3m 4m 5m 6m 7m 8m 9m 10m 11m 12m 13m 14m 15m Mounting height 1m 4m 5m 2m 6m 3m 7m 4m 8m Sensitivity : 25% 50% 75% 100% Daylight Priority Thanks for the Dual-PD technology, The sensor can tell the difference between natural light and artificial LED light, the sensor will turn on your light fixtures when the am
Model：MS009ER Focus on Intelligent lighting ON/OFF function The daylight threshold is set to "10Lux/25Lux/50Lux, Stand-by period is set to "0s". With sufficient daylight, even when motion detected, light remains OFF. With insufficient ambient brightness, light dims to 100% when motion was detected . Light keeps on 100% within the holdtime. After the last detection and the preset hold time elapsed, light OFF. The daylight threshold is set to "Disable".
Model：MS009ER Focus on Intelligent lighting Application Train station, Airport, etc. Industrial Lighting: Factory, Warehouse, etc. Commercial Ligtihng: Office, Supermarket, etc. Public Lighting: Residence, Hospital, School, Metro station Corridor Warehouse Parking Installation precautions Wiring must be strictly in accordance with the wiring diagram to avoid short circuit. The detected surface cannot be shielded by metal objects.
Caution: This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment.
