Warranty

With sufficient daylight, even
when motion detected, light
remains OFF.
With insufficient ambient
brightness, light dims to 100%
when motion was detected .
Light keeps on 100% within the
holdtime.
After the last detection and
the preset hold time elapsed,
light OFF.
With sufficient daylight, even
when motion detected, light
remains OFF.
With insufficient ambient
brightness, light dims to 100%
when motion was detected .
Light keeps on 100% within the
holdtime.
Light dims to standby level if no
motion detected after holdtime.
After the stand-by period, light
OFF.
When motion is detected, the
sensor will switch on the light to
100% brighteness.
After people leave the detection
area, light remains 100%
brightness within hold time.
After the last detection and
the present hold time elapsed,
light OFF.
The daylight threshold is set to "Disable". Light on when detect movement, After people leave, Light off after stand-by period.
The daylight threshold is set to "10Lux/25Lux/50Lux, Stand-by period is set to "0s".
The daylight threshold is set to "10Lux/25Lux/50Lux, stand-by period is set to "10s/15min".
⑤
- 05
Focus on Intelligent lightingModle: MS007
Shenzhen Mosentek Technology Co.,Ltd. Add: Building No. A, Floor 9, Shanmen community No. 3 industry park, Yanluo street, Baoan district, Shenzhen, P.R.C.
Email: [e-mail] Tel: [phone]
ON/OFF function
Dimmable control/Corridor function
①
③
④
④
②