Warranty

Daylight Priority
Note：Lux-Off sampling time--10s；
Lux-Off sampling time--10s；
Lux-On function takes effect only when standby dimming period set at +∞.
Lux off
light on automatically
Sampling time
light off automatically
Lux on
Sampling time
With sufficient daylight, even
when motion detected, light
remains OFF.
Light automatically on and dim
to the stand-by dimming levle
when ambient brightness is
lower than preset lux level.
With insufficient ambient
brightness, light dims to 100%
when motion was detected .
Light keeps on 100% within the
holdtime.
Light off when ambient lux level
is higher than preset lux amount
even there is still motion.
Light dims to standby level if
no motion detected after
holdtime.
Application
Daylight priority
Thanks for the Dual-PD technology, The sensor can tell the difference between natural light and artificial LED light, the sensor will turn on your
light fixtures when the ambient light is lower than the setting value even there is no any motion was detected. When the ambient light is up to the
setting value, the sensor will switch off the light fixtures even there is still motion.
- 04
Focus on Intelligent lightingModle: MS007
Shenzhen Mosentek Technology Co.,Ltd. Add: Building No. A, Floor 9, Shanmen community No. 3 industry park, Yanluo street, Baoan district, Shenzhen, P.R.C.
Email: [e-mail] Tel: [phone]
Lux-On function takes effect only when stand-by dimming period set at +∞.
① ③
④
②
⑥
⑤
⑥