www.gtrs.tech Intelligent Guitar GTRS Intelligent Guitar Owner's Manual www.gtrs.
CONTENT LAY OUT------------------------------------------------------------------------ 01 QUICK TOUR-------------------------------------------------------------------02 INSTRUCTIONS-----------------------------------------------------------03-04 GWF-4 WIRELESS FOOTSWITCH--------------------------------------------05 www.gtrs.
Gui Costom tars LAY OUT 01 02 03 04 05 01 02 03 04 05 GTRS control knob 6.35mm guitar line/headphone output USB Type-C port Battery compartment（ Utilize needle to open the battery compartment） Lithium-ion battery (GLP-1)（ Please ensure the GTRS logo is placed as shown when placing battery） 01 www.gtrs.
QUICK TOUR Step 1: Connect your GTRS guitar to amplifier or headphones Step 2: Rotate the GTRS control knob clockwise to turn the guitar on. The knob LED will indicate on/off status Step 3: Press the GTRS control knob to switch between different preset tones Step 4: Rotate the GTRS knob to adjust the output volume level to your preference 02 www.gtrs.
INSTRUCTIONS GTRS APP The GTRS App functions as the editor software for the GTRS guitar. Users can easily select effects and create presets for the GTRS system, download and share tones to the cloud, and update the firmware of their GTRS guitar. Several tools for practice are included in the app as well. 1. Get the GTRS APP Download the GTRS App from the App Store (iOS) or Google Play (Android). 2.
INSTRUCTIONS 2.Guitar Simulation Mode Press to switch the guitar simulation on. The purple LED indicates the guitar simulation is on while sky blue indicates the guitar simulation is turned off. 3. The guitar will begin in Preset Mode by default. You can assign defaults through: GTRS APP ‒ Settings ‒ Global - GTRS control. Tuner When the APP or wireless footswitch is connected, press and hold the GTRS knob to access the tuner. The GTRS knob LED will turn yellow. Press the knob again to exit the tuner.
GWF-4 WIRELESS FOOTSWITCH Wireless footswitch (purchased separately) The wireless footswitch can be used with GWF-4 for better control of presets during live performance. Please see the wireless footswitch manual for more information. Bluetooth Open the Bluetooth menu of your smart phone or tablet and search for“ GTRS” to connect via Bluetooth.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
