Safety Instructions

13
When in charging,the A B C D LED will flash orderly,
different LED flash indicate different battery volume.
you can judge according to the A B C D,for example
the A B LEDs are in solid green,the C LED is flashing,
it indicate the A B part is charged full and now is
charging C,in another words 50% battery volume is
charged,when battery charged full, the A B C D LED
will become solid green.
Channe LED Flashing after making pairs finished
The channel LED light flashing indicates there is signal
interference. Please switch to another channel, turn
off or stay away from other 2.4GHZ WIFI, to make
sure the transmitter and receiver antennae be in
the signal receiving range.
Antennae angle
The rear end of it is the antenna, which can be used
at about an angel of 180°. The front signal of the
transmitter and the receiver is the strongest. Please
try to keep the front to face each other during using.
Do not block the antenna with your hand or other
items, and keep the signal within the receiving range
of the antenna.
When confront with interferrence from other devices