User's Manual

Bluetooth speaker rapidly use

Open speaker original condition

Turn on the power, the indicating lamp will appear blue, audio connection re a Bluetooth

pairing, blue long bright light that is connected to the pair on a device, the red light、 blue light

flashing alternately said is searching for a new Bluetooth device

Bluetooth searching

2.Turn on bluetooth device,searching connection,the first time connecting pin is “0000”;indicator flashing slowly

says successful connection.

Speaker structure

1. With bluetooth state “PLAY/PAUSE” or bluetooth “ON/OFF”

2．Volume increase/reduce

3．USB port and power indicator

Indicator shows red when it is charging;please turn off speaker then charge.indicator turns off when it finished

charging.USB port use for charging only.

4．LINE IN port

Insert for AUX mode, pull out for bluetooth mode

5.Status indicator

Bluetooth :Blue light flashing AUX : Blue light

6.Power key

ON:turn on OFF:turn off

Product specification:

Model NO.:JHBT-01

Size:￠60mm*H57mm

Bluetooth V2.1

Transmission range:<10m

USB charging voltage:DC5V

Output power:3W

Built-in battery:Li-ion battery 3.7V / 450MA

Battery lifetime:4 hours (50% volume)

PAGE 1
Bluetooth speaker rapidly use Open speaker original condition 1. Turn on the power, the indicating lamp will appear blue, audio connection re a Bluetooth pairing, blue long bright light that is connected to the pair on a device, the red light、 blue light flashing alternately said is searching for a new Bluetooth device Bluetooth searching 2.Turn on bluetooth device,searching connection,the first time connecting pin is “0000”;indicator flashing slowly says successful connection. Speaker structure 1.
PAGE 2
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.