Users Manual

12
5.TROUBLE SHOOTING
No recepon on
the Parent Unit
Interference or
poor recepon
Image frozen on the
Parent Unit
• The power adapters may not be properly
connected.
• Ensure that the Baby and Parent Units are ON.
• Make sure the Baby Unit and Parent Unit are not
far away from each other.
• Baby Unit and Parent Unit may not be properly
paired. Follow PAIRING instrucons
• Move the Baby Unit closer to Parent Unit.
• The Baby or Parent Unit may be too close to
metal objects.
• Other electronic devices may be intering with
the signal.
• The baery power may be too low.
• Restart the Baby Unit(pull out the power adapter
from the wall outlet, wait for approx. 5 seconds and
plug it back in).
• Reset the Parent unit by opening the baery
compartment and disconnecng the baery. wait
for 30 seconds and then reconnect the baery.
A high pitched ear
piercing noise is
heard from the units
(feedback, stac)
Cannot hear the baby
sounds on the Parent
Unit
Background noises
• The Baby Unit and Parent Unit may be too
close to each other, move them further apart.
• The volume on the Parent Unit may be set too
high.
• Volume seng on the Parent Unit may be
too low. Increase the volume.
• In a quiet enviroment surrounding the Parent
Unit, decrease the volume on your Parent Unit
to level 3 and below.
• In a loud environment surrounding the Parent
Unit, increase the volume on your Parent Unit to
the maximum level.
If above ps are not help; maybe the system crashed, please disconnect
the baery and the power adapter with your unit; then plug in it again and
turn your unit
Trouble shoong