size: 199.6*114.
1.WARNING AND SAFETY INSTRUCTIONS Content 1. WARNING AND SAFETY INSTRUCTIONS 2. PRODUCT OVERVIEW 2.1 Parent unit overview 1-2 3 3 2.2 Baby unit overview 3 2.3 Icon overview 3 2.4 Product list 4 3. POWERING ON YOUR PRODUCT 4 4. USING THE BABY MONITOR 5 4.1 Music se ng 5 4.2 VOX se ing 5 4.3 Zoom in/out se ng 6 4.4 Split screen 6 4.5 Add camera 7 4.6 Delete camera 7 4.7 Temp unit se ng 8 4.8 Temp alert se ng 8 4.9 Time Se ng 9 4.10 Language se ng 4.11 Timer se ng 9 4.
le in direct sunlight. Never cut, damage or bend the power cord. Do not put any objects on top of the power cord, which could cause overhea ng,damage, combus on and electronicu on. Do not leave the power adapter connected to the wall outlet when it is not plugged into the baby or parent unit. BATTERY: Before you use the product, we recommend you fully charge the ba ery of the parent unit,so that it con nues to work if you disconnect it from the power supply to carry it to another loca on.
2.2 Baby unit overview: 2.PRODUCT OVERVIEW 2.1 Parent unit overview: Volume up Press Volume+ to increase the volume. OK key Press the OK key to confirm. Brightness down Press the Bright- to decrease the brightness. Volume down Press volume- to decrease the volume. Menu Short press the menu key the menu will pop up,and press again to Exit. Press and hold the Menu key around 2 seconds to operate Zoom in/out. Power&Charging LED *The LED shows red when chaging under the display is turn off state.
3.POWERING ON YOUR PRODUCT 2.4 Product list: Step1: Parent Unit x1 Baby Unit(Camera) x1 AC Power Adapter x2 Screw Set x1 Wall mount shim x1 User Manual x1 Charge the baby unit Step2: Press for two seconds to Power on the parent unit. 3 OK Step3: Set the parent unit to prepare for connec ng. Baby Unit Parent Unit 1 2 3 4 User Manual AC Power Adapter Wall mount shim Screw Set NOTE: If the baby unit and parent unit has been connected, the steps 3 and 4 are unnecessary.
4.USING THE BABY MONITOR 1.Press menu bu on to access menu. choose and press 2.select the lullaby you want to play and press 3.Press the NAVIGATION key to select the dura on and music volume. 4.In order to stop the lullaby playback,select 5.Press menu bu on to exit the menu. 1.Press menu bu on to access menu. choose and press 2.Press the UP key or DOWN key to select the VOX level. 3.Press to confirm. 4.Press menu bu on to exit the menu.
1.Press menu bu on to access menu. choose and press 2.Press the UP key or DOWN key to select the magnifica on. 3.Press to confirm. 4.Press menu bu on to exit the menu. 1.Press menu bu on to access menu. choose and press 2.Press the UP key or DOWN key to select the desire op ons. 3.Press to confirm. 4.Press menu bu on to exit the menu. OK OK OK OK NOTE:This func on is only available when two or more cameras are paired.
1 1 2 2 3 3 4 4 1.Press menu bu on to access menu. choose and press 2.Press the UP key or DOWN key to select the camera to be paired. 3.Press to start the pairing,while the screen shows pairing then press PAIR bu on on the back of the camera. 4.Press menu bu on to exit the menu. 1.Press menu bu on to access menu. choose and press 2.Press the UP key or DOWN key to select the camera to be canceled. 3.Press to confirm. 4.Press menu bu on to exit the menu.
Low Temp Alert Setting High Temp alert Setting 1.Press menu bu on to access menu. choose and press 2.Select and press 3.Press the UP key or DOWN key to select 4.Press to confirm. 5.Press menu bu on to exit the menu. 1.Press menu bu on to access menu. choose and press 2.Select and press 3.Press the UP key or DOWN key to set the maximum and minimum alarm temperatures. 4.Press to confirm. 5.Press menu bu on to exit the menu.
1.Press menu bu on to access menu. choose and press 2.Select and press 3.Press the UP key or DOWN key to select 4.Press to confirm. 5.Press menu bu on to exit the menu. 1.Press menu bu on to access menu. choose and press 2.Select and press 3.Press the UP key or DOWN key to select the language. 4.Press to confirm. 5.Press menu bu on to exit the menu.
1.Press menu bu on to access menu. choose and press 2.Select and press 3.Press the UP key or DOWN key to select the desired alert me. 4.Press to confirm. 5.Press menu bu on to exit the menu. 1.Press menu bu on to access menu. choose and press 2.Select and press 3.Press the UP key or DOWN key to select the desired alert volume. 4.Press to confirm. 5.Press menu bu on to exit the menu.
OK OK Volume/Brightness adjustments Press Press 1.Press menu bu on to access menu. choose and press 2.Select and press 3.Press the UP key or DOWN key to select 4.Press to confirm. 5.Press menu bu on to exit the menu.
5.TROUBLE SHOOTING Trouble shoo ng No recep on on the Parent Unit • The power adapters may not be properly connected. • Ensure that the Baby and Parent Units are ON. • Make sure the Baby Unit and Parent Unit are not far away from each other. • Baby Unit and Parent Unit may not be properly paired. Follow PAIRING instruc ons Interference or poor recep on • Move the Baby Unit closer to Parent Unit. • The Baby or Parent Unit may be too close to metal objects.
6.TECHNICAL DATA SHEET English 日本语 Technical data sheet テクニカルデータシート Frequency 2.4GHz 周波数 2.4GHz Type of modula on GFSK 変調のタイプ GFSK Transmission range Up to 960 feet/300 meters(Open space -No obstruc ons) 送信範囲 最大960フィート/ 300メートル（オープ ンスペース-障害物なし） Input voltage 5V, 1/1.2A 入力電圧 5V, 1/1.
5V, 1/1.2A 5V, 1/1.
5V, 1/1.2A 5V, 1/1.
8.2 Warranty terms 7.FCC Requirement We take quality very seriously.This is why all of our products come with three moths warranty(replace or refund)and life me technical support from the original purchase date against defects in workmanship and materials.The warranty terms do not apply to any product that has been subject to abuse,misuse, negligence or accident.Defects caused by this warranty.
Printed in China Version:1.
