Specifications

Copyright © Minew
18
m1805 Module Specification
(2) Please store the modules within -40
℃
to +125
℃
before and after installation and make sure
the modules is away from the direct sunlight exposure for a long duration. Modules should be far
away from humid and salty air conditions, and any corrosive gasses or substances.
(3) Please not to wash the module. No-Clean Paste is used in production. The metal shield may
be oxidized by the washing process and may lead to chemistry reaction with No-Clean Paste. If
modules goes through the washing process, functions of the module may not guaranteed.
7.5 Life support applications
(1) The module is not design for life support device or system and not allowed to be used in
destructive devices or system in any direct, or indirect ways. Minew is not responsible for
compensation of any losses when applying modules under such application as described above.
(2) Minew shall not responsible for the customer’s products or application.
8. Disclaimer
The factory has passed the ISO9001 quality management system, ISO14001 environmental
management system and OAHS18001 occupational health and safety assessment . Each product
has been rigorously tested (transmission power test, sensitivity test, power consumption test,
stability test, aging test, etc.).
* NOTICES:
(1) The Bluetooth trade mark is owned by the Bluetooth SIG Inc. USA.
(2) All other trademarks listed herein are owned by their respective owners.
(3) All specifications are subject to change without notice.
(4) Please do not use this specification for produce, sell or illegal purpose without Minew’s
authorization.
(5) Minew have right to interpret all the items above.