Installation Instructions

Indoor Beacon_i10
All Rights Reserved by Minew | minew.com
3
MOUNTING METHOD
- Attach i10 to the objects by double-sized adhesive;
- Fix i10 to the objects by screws mounting. There are two positions for screws mounting as showing in the
pics below:
1) On the side of the casing; 2) At the bottom casing;
BATTERY ASSEMBLY
- Pre-installed 2pcs alkaline AA (LR6) batteries;
- If need to replace the batteries, please do check the polarity of batteries and battery-socket before
assembly;
ELECTRONIC PARAMETER
Item
Value
Remarks
Case Color
White
Other colors can be customized
Battery Model
2 x AA (LR6)
2pcs alkaline batteries, 2200mAh, 3.0V
Operation Voltage
1.8-3.9V
DC
Transmission Circuit
5.3mA (Max.)
Tested at 0dBm transmission power
Transmission Range
200 meters
Maximum @ open space
Transmission Power
-40dBm to +4dBm
Configurable
Broadcasting Interval
900ms
Default setting, configurable
Antenna
50ohm
On board / PCB Antenna
Accessories
Double-sided adhesive
1pc, high strength
Screws
2pcs screws and 2pcs plastic holders
Net Weight
56.0g
With batteries
Size
73.5 x 44.8 x 24.2MM
Null