Service manual

2-2
2.2.2 Connectors for Peripheral Devices
The connectors for peripheral devices are located at the top, right side and bottom of the
pulse oximeter as shown in the figure.
 Multifunctional connector
It is a DB 9 connector which is used to connector a Mindray SpO
2
sensor (including
reusable sensor, disposable sensor and veterinary sensor) to measure the oxygen
saturation or connect a personal computer through a PC communication cable to export
trend data.
 Infrared port
It is a port through which a personal computer is communicated using a infrared adapter
to export data in real time without affecting patient monitoring.
 Power supply connector
It is a female power socket which is used to connect the charger stand’s male power
plug . To avoid being mixed with other power supply adapters, it has nonstandard size.