User's Manual
Table Of Contents
- 1 Safety
- 2 General Product Description
- 3 Getting Started
- 3.1 Unpacking and Checking
- 3.2 Environmental Requirements
- 3.3 Connecting the ECG Leadwire
- 3.4 Installing the Batteries
- 3.5 Powering On the Unit
- 3.6 Understanding Touch Gestures
- 3.7 Basic Operations
- 3.7.1 Understanding the Screen Display Orientation
- 3.7.2 Browsing the Screen Display
- 3.7.3 Switching the Screen Display Orientation
- 3.7.4 Flipping the Landscape Display
- 3.7.5 Displaying the Quick Keys Area
- 3.7.6 Entering the Main Menu
- 3.7.7 Turning the Display Off
- 3.7.8 Turning the Display On
- 3.7.9 Unlocking the Screen
- 3.7.10 Acknowledging the Nurse Call
- 3.8 Using the Pouch
- 4 User Configurations
- 5 Patient Management
- 6 Alarms
- 7 Monitoring ECG
- 7.1 Introduction
- 7.2 Safety
- 7.3 Preparation for Monitoring ECG
- 7.4 Changing the ECG Settings
- 7.5 Understanding the ECG Display
- 8 Monitoring SpO2 (Optional)
- 9 Monitoring with the TD60 at the CS
- 9.1 Introduction
- 9.2 Physiological Alarms
- 9.3 ECG Monitoring
- 9.4 QT Monitoring
- 9.5 ST Monitoring
- 9.6 Arrhythmia Monitoring
- 9.7 SpO2 Monitoring
- 10 Configuring the TD60
- 10.1 Introduction
- 10.2 Maintenance Menu
- 10.2.1 Entering the Maintenance menu
- 10.2.2 Configuring the General Menu
- 10.2.3 Configuring the Alarms Menu
- 10.2.4 Quick Keys Menu
- 10.2.5 Configuring the Defaults Menu
- 10.2.6 Transferring a Configuration
- 10.2.7 Screen Lock Menu
- 10.2.8 Changing the Passwords
- 10.2.9 Changing the Device Name
- 10.2.10 Demo Mode
- 10.2.11 Service Menu
- 11 Battery
- 12 Troubleshooting
- 13 Cleaning and Disinfecting
- 14 Maintenance
- 15 Accessories
- A Product Specifications
- B EMC
- D Symbols and Abbreviations
- E Anomaly
Monitoring SpO2 (Optional) Understanding the SpO2 Display
TMS60 Operator’s Manual 8 - 11
8.7.2 About the SpO
2
Digital Area
■ The SpO
2
digital area displays in units of % with a resolution of 1%.
■ The SpO
2
PR value displays in units of bpm with a resolution of 1 bpm.
■ Displays Masimo PI resolution as 0.01 when the PI value is smaller than 10%.
■ Displays Masimo PI resolution as 0.1 when the PI value is greater than or equal to
10%.
■ If the SpO
2
measurement or PR is invalid, “- - -” displays in place of digits.
8.7.3 SpO
2
Waveform Area
The SpO
2
waveform area displays:
1. Signal Indicator Quality (SIQ)
2. Area name
3. Pleth waveform
Masimo SpO
2
waveform area (SIQ enabled)
Nonin SpO
2
waveform area
8.7.4 About the SpO
2
Waveform Area
■ Displays in the configured SpO
2
color.
■ Provides scrolling, real-time waveform data.
■ Scrolls the waveform in the configured sweep speed.
■ Automatically scales the SpO
2
waveform data area to maximize the vertical height
of the Pleth waveform for the data range.
■ If using Masimo SpO
2
, the Signal Quality Index (SIQ) will display below the
waveform if enabled.
3
2
1