User's Manual
Table Of Contents
- 1 Safety
- 2 General Product Description
- 3 Getting Started
- 3.1 Unpacking and Checking
- 3.2 Environmental Requirements
- 3.3 Connecting the ECG Leadwire
- 3.4 Installing the Batteries
- 3.5 Powering On the Unit
- 3.6 Understanding Touch Gestures
- 3.7 Basic Operations
- 3.7.1 Understanding the Screen Display Orientation
- 3.7.2 Browsing the Screen Display
- 3.7.3 Switching the Screen Display Orientation
- 3.7.4 Flipping the Landscape Display
- 3.7.5 Displaying the Quick Keys Area
- 3.7.6 Entering the Main Menu
- 3.7.7 Turning the Display Off
- 3.7.8 Turning the Display On
- 3.7.9 Unlocking the Screen
- 3.7.10 Acknowledging the Nurse Call
- 3.8 Using the Pouch
- 4 User Configurations
- 5 Patient Management
- 6 Alarms
- 7 Monitoring ECG
- 7.1 Introduction
- 7.2 Safety
- 7.3 Preparation for Monitoring ECG
- 7.4 Changing the ECG Settings
- 7.5 Understanding the ECG Display
- 8 Monitoring SpO2 (Optional)
- 9 Monitoring with the TD60 at the CS
- 9.1 Introduction
- 9.2 Physiological Alarms
- 9.3 ECG Monitoring
- 9.4 QT Monitoring
- 9.5 ST Monitoring
- 9.6 Arrhythmia Monitoring
- 9.7 SpO2 Monitoring
- 10 Configuring the TD60
- 10.1 Introduction
- 10.2 Maintenance Menu
- 10.2.1 Entering the Maintenance menu
- 10.2.2 Configuring the General Menu
- 10.2.3 Configuring the Alarms Menu
- 10.2.4 Quick Keys Menu
- 10.2.5 Configuring the Defaults Menu
- 10.2.6 Transferring a Configuration
- 10.2.7 Screen Lock Menu
- 10.2.8 Changing the Passwords
- 10.2.9 Changing the Device Name
- 10.2.10 Demo Mode
- 10.2.11 Service Menu
- 11 Battery
- 12 Troubleshooting
- 13 Cleaning and Disinfecting
- 14 Maintenance
- 15 Accessories
- A Product Specifications
- B EMC
- D Symbols and Abbreviations
- E Anomaly
Alarms Alarm Indicators
TMS60 Operator’s Manual 6 - 3
6.4 Alarm Indicators
When a technical alarm occurs, the TD60 notifies the user through visual or audible
alarm indications.
■ Alarm light
■ Audible alarm tones
■ Alarm message
6.4.1 Alarm Light
If a technical alarm occurs, the alarm light on the TD60 flashes. The color and flashing
frequency correspond to the alarm level as follows:
6.4.2 Alarm Tones
The TD60 has three alarm tone configurations: ISO, Mode 1 and Mode 2. For each
configuration, the alarm tones enunciate the alarm levels as follows:
NOTE
• When the TD60 display is off, the user must activate the screen to view
any local alarms.
■ High level alarms:
the lamp quickly flashes red.
■ Medium level alarms:
the lamp slowly flashes yellow.
■ Low level alarms:
the lamp lights cyan without flashing.
■ ISO pattern:
◆ High level alarms:
◆ Medium level alarms:
◆ Low level alarms:
triple+double+triple+double beep
triple beep
single beep
■ Mode 1:
◆ High level alarms:
◆ Medium level alarms:
◆ Low level alarms:
high-pitched single beep
double beep
low-pitched single beep
■ Mode 2: