User's Manual

Table Of Contents

User Configurations Configuring the Display

TMS60 Operator’s Manual 4 - 3

4.2.4 Understanding Landscape Orientation Display Rules

In landscape orientation, waveform areas take up the entire width of the screen. Digital

areas only take up one half of the width of the screen. The following rules define how the

tiles will be laid out:

1. The areas shall be displayed in the order of the [Display Setup] menu except the

digital area locations shall be optimized to reduce blank tiles.

2. A waveform area always takes up the entire width of the screen.

3. A digital area always takes up one half of the width of the screen. Therefore, a row

with a digital tile in it shall be split into two half tiles.

4. A digital area shall not be the only parameter in a row unless an odd number of

digital areas exist. In this case, the last digital parameter area shall have one tile on

the left side and the right half will be blank.

5. Digital areas shall be paired with the next available digital area to satisfy rule 4.

This means that a digital area may be moved ahead of a waveform area if a half of a

row needs to be filled.

For example, if the landscape display rows is set to [3] and the parameter order is as fol-

lows:

ECG I

ECG II

ECG III

ECG aVR

ECG aVF

ECG aVL

ECG V

SpO

PLETH

The landscape layout displays as follows:

HR* SpO