User's Manual

EMC
TMS60 Operator’s Manual B - 5
If the system is operated within the electromagnetic environment listed in Table Guid-
ance and declaration — electromagnetic immunity, the system will remain safe and
provide the following essential performance:
■ Operating mode
■ Accuracy
■ Function
■ Accessories identification
■ Data stored
■ Alarm
■ Detect for connection
Recommended separation distances between portable and mobile RF communication and the system
The system is intended for use in an electromagnetic environment in which radiated RF disturbance are
controlled. The customer or the user of the system can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communication equipment (transmitters)
and the system as recommended below, according to the maximum output power of the communication
equipment.
Rated Maximum
Output power of
Transmitter W (Watts)
Separation Distance According to Frequency of Transmitter M (Meters)
150kHz -80MHz
d =
80MHz to 800MHz
d =
800MHz to 2.5GHz
d =
0.01 0.12 0.12 0.23
0.1 0.37 0.37 0.74
1 1.17 1.17 2.34
10 3.69 3.69 7.38
100 11.67 11.67 23.34
For transmitters at a maximum output power not listed above, the recommended separation distanced in
meters (m) can be determined using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
Note: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
3.5
3
-------- -
P
3.5
3
-------- -
P
7
3
-- -
P