User's Manual

Configuring the TD60 Maintenance Menu
TMS60 Operator’s Manual 10 - 7
3. Tap to exit the Defaults menu.
10.2.6 Transferring a Configuration
The TD60 is capable of configuring multiple devices through one export operation via a
wireless interface.
To transfer the configuration from the TD60 unit to an external device:
1. In the Maintenance menu of an external device, tap Defaults → Import Device
Settings to enter the settings import mode.
2. In the Maintenance menu of the TD60 unit, tap Defaults → Export Device Set-
tings to enter the Export Device Settings menu.
The discovered external devices are listed in the Export Device Settings menu.
3. Select the desired external devices by tapping the check box.
4. Tap Export to start exporting the TD60 unit configuration.
The selected external devices screen will shortly display the “Downloading device
settings” message.
■ On the external devices if an import is successful, the external device will display
the “Download complete.” message, and after 10 seconds return to the Defaults
menu. On the TD60 unit, the status for the external device will display the
“Complete” message.
■ On the external device if the import fails, the external device will display the
“Import attempt failed.” message. On the TD60 unit, the status for the failed
external device will display the “Failure” message and remain in the list.
The user has two options when a failure occurs:
◆ To stop the import from the external device, tap the icon to exit the
Import Device Settings.
Import Device Settings Copies the settings from the external device to theTD60 unit. Refer to "Trans-
ferring a Configuration" on page 10 - 7 for details.
Restore Factory Defaults Allows an authorized user to reestablish the original database power up
settings to factory default values.
Options Description
WARNING
• Do not power off the devices during the download process.