User's Manual

2
1.2.2 Environmental Requirements
T
he operating environment of the equipment must meet the Environmental Specification in
Appendix B.
3.1.2 Power requirements
T
he power used for this equipment must meet the Power Specification in Appendix B.
WARNING

Make su
re that the operating environment and power of the equipment meets the
specific requirements. Otherwise unexpected consequences, e.g. damage to the
equipment, could result.
3.1.3 Installation method
Installati
on methods of adhesive ECG recorder, please refer chapter 4.
3.2 Cleaning and Disinfection
Only adh
esive ECG recorder and changer need cleaning and disinfection. The accessories are single
use products. So they need not cleaning and disinfection.
3.2.1 Cleaning
T
he ECG recorder should be cleaned beroe and after use. The charger should be cleaned beroe use.
Please use clean and soft cloth, sponge or tampon adsorb non-erosive cleaning agent and dry
appropriately to clean the surface of the equipment. Recommended cleaning agents are:
 Water
 Ethanol (70%)
 Isopropyl alcohol (70%)
To clean your equipment, follow these rules:
1. Clean the exterior surface of the equipment using a soft cloth dampened with the cleaner,
making sure that no cleanser is dripping from the cloth.
2. Wipe off all the cleaning solution with a dry cloth after cleaning if necessary.
3. Dry your equipment in a ventilated, cool place.