User's Manual

3. Access to internet by Ethernet
Notice: Place the device on a stable surface.
1). Open the packing box, insert the power adapter into the power port of CPE.
2). After power on, all indicators will on, then power indicator steady on, WiFi
indicator steady on;
3). Connect the WAN port to Ethernet port, WAN indicator will steady on, it will
blinking once data is being transmitted.
4). Connect the LAN port to the end device, LAN indicator will steady on, it will
blinking once data is being transmitted.
Or connect the end device through WiFi, WiFi indicator will blinking once
data is being transmitted.
tablet PC
CPE
smart phone
power adaptor
internet terminus
computer
laptop