User Manual V1.
1.
1 On：CPE connected to power, indicator is on; Off: Power indicator: CPE not connected to power, indicator is off. On：insert SIM card ,successfully registered to 4G/3G network ,indicator turns green； 2 Internet indicator: 3 WiFi indicator: Off：CPE not connected to power,or no SIM card,or not registered to network. On:when user connected to WIFI , indicator is on. Off: CPE power off , indicator off.
3. Access to internet by Ethernet Notice: Place the device on a stable surface. 1). Open the packing box, insert the power adapter into the power port of CPE. 2). After power on, all indicators will on, then power indicator steady on, WiFi indicator steady on; 3). Connect the WAN port to Ethernet port, WAN indicator will steady on, it will blinking once data is being transmitted. 4). Connect the LAN port to the end device, LAN indicator will steady on, it will blinking once data is being transmitted.
4. Access to internet through 4G network: Notice: Place the device on a stable surface. 1). Slide off the card slot cover, insert the standard Micro SIM card as following picture: 2). Open the packing box, insert the power adapter into the power port of CPE; 3). After power on, all indicators will on, then power indicator steady on, WiFi indicator steady on; 4).
5. Set up a WiFi connection 1). Make sure CPE is turned on, and WiFi is on working; XXXXX XXX XXXX 2). Power on the end device to enter the WiFi setting; 3). Click the SSID of CPE, SSID and password are on the sticker of CPE, refer to the right picture; SSID:4G-CPE-xxxxxx Wifi-key:A1b2c3d4 4). Enter WiFi password, click connect, WiFi connection is successful after WiFi indicator blinking.
6. Login WEB UI 1). Make sure the 4G CPE is power on, and your computer and mobile phone connected with 4G CPE; XXXXX XXX XXXX 2). Open the browser of computer or mobile phone; 3). Enter the IP address into the address bar of browser, IP address is as right picture; IP: 192.168.100.1 User: admin Password: admin 4). Enter the user name and password into the prompt dialog box, user name and password are: admin; 5).
7. Faulty checking and Notices: Faulty checking: 1). Power indicator is off, please check if you plug the power adapter properly. 2). 4G indicator is off, please check if you insert SIM card properly. 3). 3G/4G indicator doesn't blinking: a, It is searching for the internet while it steady on within 3 minutes; b, It can't connect to internet while it steady on more than 3 minutes, please change the CPE into another place Notices: 1).Place the device on a stable surface. 2).
STATEMENT
