User's Manual

Skylle 1550 User Manual 20181107V2 |30
16 / 31
CONTROLLER BATTERY
Attachment of the battery
1. T14SG to HTF1800B is removed.
2. A LiFe spacer (14SG attachment) is inserted as shown in figure.
3. A Controller battery (Option) is inserted as shown in figure.
4. 2P connector of a controller battery is connected.
5. Close the battery cover completely.
6. T14SG is turned on and [LINKAGE MENU]=>[WARNING]=>[LOW BATTERY] is called.
7. It changes into 6.0V from 5.6V.
Charging Controller battery
Note: Controller battery cannot be charged with the charger of 14SG
attachment.
Home Screen
Use the touch sensor to select the following display area to call each setting screen, and touch the RTN button. The setting
screen appears.
User Menu
A user menu which allows the user to customize and display frequently used functions has
been added.
a. When the “U.MENU” button is pushed for two seconds, the user menu appears.
*Return to the home screen by touching the EXIT button while the user menu is being displayed.
b. When the cursor highlights the dotted line, “ ---------- ” and the RTN button is touched, the
menu selection screen appears.
c. When the cursor is moved to the setting that you to set to the user menu and the RTN button
is touched, that setting screen is added to the user menu.
d. The registered setting screen can be called by moving the cursor to it and touching the RTN
button.
*When you want to delete an added screen from the user menu, highlight item you wish to
delete, press and hold the RTN button for one second.