Quick Start Guide

4. USB Function Description
4.1 USB Functions
When the device is connected to the computer through the USB cable, the device will pop up three
options of memory mode/PC camera mode/video mode for the user to select. Press the up and
down selection keys to select any mode and press OK to confirm.
4.1 USB Function Mode
① Memory mode: Enter the device memory on the PC side to view and process the photos and
video files inside. At this time, only the on/off key and the light supplement lamp brightness level
are available.
② PC camera mode: At this time, only the on/off key and the supplementary light brightness
level are available. Open the software Amcap on the PC side to display images. If the image
cannot be displayed, you can select the device name in the second Devices to check the USB
video device, and then select the third Options to check Preview to display the image.
③ Video recording mode: The equipment enters the charging state and can be operated normally
if necessary.