User's Manual

User’s Manual
Product introduction
Packinglist
1.Wireless charger ×1
2.USB cable ×1
3.Air outlet clip ×1
4.Operation instructions ×1
Operation instructions
1. Put the screw nut into ball joint of , insert the air vent mount into the ball joint
and tighten with screw nut.
2. Insert the air vent clip into the car air outlet vane and tighten to lock.
3. Plug in the Type-C cable, the arm clamps on both sides will automatically
open, and place a mobile phone in, the arm clamps on both sides will
automatically clamp the mobile phone tightly.
Flashing Pattern
Mode Indicator
Power on
Standby
Charging
Full charge
Foreign objects are detected
Under overtemperature
protection status
Product parameters
3-Clamp arm
2-Air vent clip
4-Button
5-Indicator
1-Double coil Wireless charging area
6-Bottom bracket
The blue light is always on
Green light breathing
The light goes out
The blue light turns to green for 0.5
seconds and then turns blue and
always on
The Blue light flashes for about 5-6
seconds then always on.
The Blue light flashes for about 5-6
seconds then always on.
Smart Car Fast Wireless Charger
Frequently Asked Questions
(1) Please make sure your phone supports wireless charging.
(2) Please check if you have used a QC3.0 car charger.
(3) Please use the original cable to connect the power supply before use.
(4) Please check the thickness of the phone case does not exceed 5 mm.
(5) Please make sure there is no metal material, magnetic objects, credit
cards or pop holders on the back of your phone between the phone and the
phone case.
Why doesn't this charger work ?
Why not fast charging or not charging?
Please use a QC3.0 car charger for fast charging.
Make sure that you are using the right adapter and there is no problem with the
charging cable and try restarting your phone.
My phone is compatible with wireless charging so why won't it
charge with my wireless charger?
QC 3.0 car charger(NOT INCLUDED)
Product details
1. This product has the power storage function and can open and close the arm
clamps twice after flameout to prevent the embarrassment of failing to open
the arm clamp after flameout.
2. This product adopts waveform anti-skid silicone pad design, which can
effectively avoid mobile phone buttons.
3. This product adopts u-shaped armlock radian and won’t slide out either even
if the phone screen is placed downward.
4. This product has circulating cooling holes to protect mobile phones from
heating during charging.
Product description
The wireless charger supports 15W fast charging and is available for both
Apple and Android models.
Wireless charging for equipment conforming to Qi wireless charging
standards.
The automatic retractable clamp arm is flexible so you can easily fix the
mobile phone to charge it or retrieve it
This product has functions of overcurrent protection, overheat protection and
short circuit protection and has product certificates of FCC, CE and ROHS.
Wireless charging sensing: when the mobile phone with wireless charging
approaches the charger and is sensed later on, the two arm clamps will
automatically clamp the mobile phone tightly and charge it wirelessly.
Foreign objects detection sensing: when the mobile phone without wireless
charging approaches the charger and is sensed later on, the two arm
clamps will also tightly clamp automatically, which can be used as a mobile
phone mount.
Description
Fully Automatic wireless car
phone mount
Input Power
5V/2A 9V/2A
Model No. Output Power
15W(MAX)CW30
Product size Valid distance of wireless charging
≤5mm116*70*54
mm
package size
Unit Net Weight
Conversion efficiency
60%~80%118*75*77mm
142.2
g
Gross weight
256g
Operation frequency
110-205KHz
Color
Black
Materials
ABS+PC