Specifications

Microwave Module MIC01-5GH01 Version: A1
Shenzhen Merrytek Technology Co.,Ltd
Add: 2
nd
and 3
rd
floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: [phone] Fax: [phone] Website: www.merrytek.com
Page
8
of
8
13) There should be no metal accessories or glass directly in front of and near the product, so as not to affect
the normal operation of the sensor. And the thickness of the plastic should be less than 2mm, otherwise may
affect the detection effect.
14) There should be a certain height difference between the antenna surface and the metal plane (aluminum
substrate, iron casing), and the recommended distance is greater than 5mm.