Specifications

Microwave Module MIC01-5GH01 Version: A1
Shenzhen Merrytek Technology Co.,Ltd
Add: 2
nd
and 3
rd
floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: [phone] Fax: [phone] Website: www.merrytek.com
Page
2
of
8
1. Features
2. Application
MIC01-5GH01 has the advantages of long sensing distance, built-in, no dead zone, and not affected by temperature
and humidity, noise, dust, air flow, and ambient light. It is widely used in induction lamps, automatic door control, smart
home, smart bathroom, small household appliances, security, IoT, smart terminals and other products, suits for
corridors, garages, toilets, courtyards, balconies and other places.
3. Parameter
Input
Operating Voltage Range
5-12V DC
Rated Current
33±3mA
Output
Mode
Motion detected, output TTL control signal
Level output
High level: 3.3V±0.2V DC
Low level: 0V+0.2V DC
Sensor
HF system
5.8 GHz ±75 MHz, ISM wave band
Transmitting Power
0.1mW max
Hold time
Please refer to the diagram and the pins definition.
Stand-by DIM level
Stand-by period
Detection sensitivity
Daylight sensor
Detection area (radius)
≥4m (typical value, ceiling mounted at a height of 3m, walking
speed of 0.3m/s)
Mounting height
6m Max
Detecting angle
360°(ceiling mount); 110°(wall mount)
1) 5-12Vdc input, low working current, and low standby power.
2) Small size and easy to install.
3) Patented low impedance antenna design to avoid interference with other
wireless signals.
4) Built-in multiple digital filter algorithm to resist breeze and drizzle, and
outputs high and low level signals.
5) Detection area, hold time, daylight threshold and other pins are reserved.
6) Multi-function extension pins F1-F5 are available, and sensing function is
easy to expand, no additional MCU is required.
！
Please read the 10th instruction carefully before using this product, since the performance of DC-powered microwave products
is closely related to the stability and characteristics of the auxiliary power supply of the LED driver.