User’s Guide FCC ID: 2AB5T- QCHOCOLATE
Contents 1. Introduction 2. Battery Precautions 3. Getting Started 4. Cable Connection 5. Bluetooth Connection 6. NFC Connection 7. Microphone Usage 8. Charging And LED Indicator Light 9. Product Care Please read the following safety warnings and precautions before using your device.
Specification Qchocolate Output Power: 8W S/N: >75dB Frequency range: 60Hz-20KHz Power supply: Lithium battery or USB cable Audio source: iPhone, iPad, Smartphone, Notebook, MP3, MP4, etc Function spec: Bluetooth, Microphone, Line-in Size: 145.0mm x 45.0mm x 55.0mm Rechargeable battery with charging option from USB cable Operating range up to 10 meters 1. Introduction Thank you for purchasing Qchocolate. This device can be easily connected with audio or video devices for your daily needs.
2. Battery Precautions The device is power by a built-in rechargeable lithium battery. Please charge the battery at least 8 hours before your first use of device. If the device is not used for a long period of time, the battery may be out of power. please charge the battery. Rechargeable batteries are only to be charged under adult supervision. Do not attempt to open the rechargeable battery or battery pack. There are no serviceable parts inside. Should a battery leak, the device may become damaged.
3. Getting Started Previous OFF/ON Microphone NFC Next Play/Pause Micro USB AUX USB AUX 4. Cable Connection USB AUX 3.
5. Bluetooth Connection Pairing Qchocolate to your devise (devise should be within 10 meters of your speaker) 1. Activate pairing mode on Qchocolate by pressing “ON/OFF” button. After prompt voice, the device is in pairing mode and can be searched. 2. Navigate to the Bluetooth function (refer to the tablet owner’s manual to locate Bluetooth function). 3. Select “Set Up” Bluetooth or turn “ON” Bluetooth. 4. Select “Search” or “Discover” devices. 5. Select “Qchocolate” 6.
6. NFC Connection NFC: Near Field Communication, is a set of standard for smartphone and this speaker to establish Bluetooth radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. Please activate the NFC function (subjects to device own setting) function of your Bluetooth device. Bring your Bluetooth device close to speaker, as above picture.
. Charging and LED Indicator Light Built-in lithium battery,can be charged through micro USB cable, see below picture: PC Notebook Charging by USB USB AUX The indicator light status display as below: Green Light Red Light LED Display Flash slow Stay solid Flash fast Stay solid OFF Light Indication Ready to pair Paired Low battery Charging in process Fully charged 9. Product Care Your device is designed to be heavy and durable. As an electronic device, it must be treated carefully.
Do not drop, crush, bend or apply excessive force to the device. Clean the unit with a soft cloth or damp chamois leather. Never use solvents. The unit can only be opened by qualified person. This device contains magnets. Keep magnetic field sensitive products such as credit cards and video screen away from this device to avoid damage or malfunction. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.