User’s Guide Diamond FCC ID:2AB5T-DIAMOND
Contents 2 3 1. Introduction 4 2. Battery Precaution 5 3. Getting Started 7 6. NFC Connection 7 5. Bluetooth Connection and disconnection 5 4. Cable Connection 7 7. Microphone usage 8 8. LED Display Status 8 9. Battery Charging 10. Product Care Please read the following safety warning and precaution before using your device.
Specification Diamond Output Power: 10W Battery Capacity: 1300mAh >75dB S/N: Frequency range: 40Hz-20KHz Lithium battery or USB cable Power supply: iPhone, iPad, Smartphone, Notebook, MP3, MP4, etc Audio source: Bluetooth, Microphone, Line-in Function spec: 120mm x 70mm x 56mm Size: Rechargeable battery can be charged by USB cable Operating range up to 20 meters 1. Introduction Thank you for purchasing the Diamond Audio system-a music player, an innovative portable Bluetooth speaker with built-in battery.
2. Battery Precautions The device can be powered by built-in rechargeable lithium battery. Please charge the battery for at least 8 hours before your first use of device. If the device is not used for a long period of time, the battery may be out of power. Please charge the battery. Rechargeable batteries are only to be charged under adult supervision. Use only the supplied USB micro cable to recharge the battery. Improper charging may damage the battery and the device.
3. Getting Started General controls Play/Pause MIC Previous Next Volume Down Volume UP Bluetooth pairing key AUX Power switch Micro USB/Only for Charging.
4. Cable Connection 3.5mm stereo jack 5. Bluetooth Connection and disconnection Pairing Diamond with your smartphone ( should be within 20 meters) a. Activate pairing mode on Diamond by switching “ON/OFF” button to “ON”. The LED will flash in red and blue color. b. On your speaker, navigate to the Bluetooth function (refer to the tablet owner’s manual to locate Bluetooth function). c. Select “Set Up” Bluetooth or turn “ON” Bluetooth. d. Select “Search” or “Discover” devices. e. Select “Bluetooth”. f.
After completing the steps above, a message on your smartphone will appear cofirming that your device is now . paired/connected. then you will see the blue LED light stay solid, which means that this speaker pairs with your smartphone succeessfully. In case of unsuccessfully pairing, push this speaker to “OFF” and restart it to “ON” Notice: 1. If you turn off the speaker but the Bluetooth on your smartphone remains open, when you restart it, the Bluetooth will be connected automatically. 2.
6. NFC Connection NFC: Near Field Communication, is a set of standard for Smartphone and this speaker to establish Bluetooth radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. Please activate the NFC function (subjects to tablets own setting) of your Bluetooth device. Bring your Bluetooth device close to speaker, as above picture.
. Battery Charging The device has built-in rechargeable lithium battery that can be charged by connecting to the USB port of your computer or into an AC adapter with USB port. When charging is completed, the red light will go off. 10. Product care Your device is designed be portable, as an electronic device and it must be treated carefully. Putting unnecessary pressure on it or striking the device against other objects may cause damage. Do not drop, crush, or apply excessive force to the device.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
