User's Manual

#
7
#
4
#
3
2
1
0
5
4
#
5
*
#
7
#
5
#
3
21
0
5
4
#
*
#
7
#
6
#
3
2
1
0
5
4
#
*
+ + +
+ +
+
+
+
+ ++
+
+
+ + +
产品 手册
User manual
For example: Set as password control output
Press[*] for 3 seconds
Enter password
Please select programmable output port follow event
1.Follow alarm output 2.Follow arm output
3.Follow AC power fault output
4.Follow Communication fault output
5.Password control output
Hint: when setting as password control output, press key 5 for 3 seconds,
then enter the user password, the programme output port will be open
or closed. Voice phone or SMS also can open or close the outport.
Press[*] for 3 seconds
Enter password
6.7.6.Restore to factory default
Press * for 3 seconds
Enter password
Please re-confirm to restore
to factory default.
Press confirm key to save,
press back key to exit.
Please re-confirm to restore
to factory default.
Press confirm key to save,
press back key to exit.
*
#
8
#
3
2
1
0
5
4
+ ++
6.8. Set GSM module
Press[*] for 3 seconds
For example: Set enable GSM module, telephone line priority, Set GSM bill
reminder time is 21st Dec. 2012.
The voice prompt will instruct you
to proceed below operations.
32
6.7.5.Delete system events