User's Manual

#
6
#
5
#
3
2
1
0
5
4
#
4
#
5
#
0
NOTE: max set 4 group relate zone
6.7 system maintance
*
#
7
#
3
2
1
0
5
4
1
2
3
4
5
6
*
+ + +
+ +
+ +
+
0
+
9
#
2
+ +
0
1
#
+ +
3
+ ++
+
产品 手册
User manual
2>EXIT-ENTRANCE single trigger model: trigger zone 1, zone 1 make alarm.
Trigger zone 2 first, then during the period of related time trigger zone 1,
do not make alarm. Trigger zone 2, then do not trigger zone 1 during related
time, then zone 2 make alarm.
3> Dual trigger alarm mode: trigger zone 1 or zone 2 only do not make alarm.
During related time trigger zone 1 or zone 2, then zone 1 or zone 2 make alarm.
Example: set zone 5 and zone 9 as greep #4 dual trigger mode related zone,
related time is 120sec.
Press[*] for 3 seconds
Enter password
Press[*] for 3 seconds
Set timing arm /disarm
Recording
Play recoreding
Set programmable output port
Delete system log
Restore to factory default
Eneter correlate group
# , press confirm key to
confirm or press back key
to exit setting.
Enter the firstcorrelate zone #
press confirm key to savesetting,
or press back key to exit setting.
Settingsaved, enter second related
zone #, press confirm key to save
setting or press back key to exit setting
Setting is saved, press set relate time from
2 to 255sec, and press confirm key to save
setting, or press back key to exit setting
Setting is saved, pls choose relate mode. 0
disable relate mode , 1 entrance-exit dual
trigger mode, 2 entrance-exit single trigger
mode, 3 dual trigger mode. Press confirm
key to save setting or press back key to exit.
30