User's Manual

#
6
#
1
#
3
2
1
0
5
4
3
#
9
*
+ + +
+ +
+
7
#
+ +
Example: set zone 39 as keyzone type
2.interior zone only trigger alarm when the zone is triggered under system at
armed status.
3.delay and perimeter zone trigger alarm when the zone is triggered under
system at armed or home arm status.
4.emergency zone, 24 hours zone, fire zone will trigger alarm when system
at any status
5.wirelss zone can not set key zone type. When wired zone is set as keyzone,
trigger the zone, system turn to disarm status. The zone restore, system turn
to armed status. This is for access contron system.
#
6
#
2
#
3
21
0
5
4
2
#
3
*
++ + +
+ +
产品 手册
User manual
Press[*] for 3 seconds
Enter password
6.6.2 set zone siren type(factory default is pefal point)
Example set zone 23’s siren type as pulse tone
Enter password
Press[*] for 3 seconds
Please enter the zone No. to modify.
Press confirm key to save,
Pressback key to exit.
Please choose zone type:
0. Disable the zone 1. Delay zone 2. Perimeter zone 3. Interior zone
4. Emergency zone 5. 24 hours zone 6. Fire zone 7. Key zone
Please enter the zone
number to modify.
Press confirm key to save,
Pressback key to exit.
Please choose zone siren type:
1.pedal point 2.pulse tone 3. Mute
Press confirm key to save,
Pressback key to exit.
#
2
+ +
6.6.3 set wired zone loop type(factory default EOL )
The options is as below:
28
1>EOL loop type: when the resistor value is 10k on the zone is normal, when
the zone is open loop or shortcut trigger alarm
2>N/C loop type: zone shortcut is normal, open loop trigger alarm
3>N/O loop type: zone open loop is normal, shortcut loop trigger alarm