User's Manual


E‐8
CONNECT POWER
Risk of product damage!
- Ensure that the power supply voltage corresponds to
the voltage printed on the back or the underside of
the unit.
- Before connecting the AC power cord, ensure you
have completed all other connections.
- Connect the mains plug of the main unit to a mains
socket.
- Ensure all connections are connected before
connecting to the mains power socket.
GETTING STARTED
• Press the POWER ON/OFF SWITCH (#12) on the rear of the soundbar to ON
position, the main unit will enter standby mode, the STATUS INDICATOR (#7)
will light up red.
• Press the
BUTTON (#6) on the main unit or the BUTTON (#1) on the
remote control to switch the JSBW-750 on. The STATUS INDICATOR (#7) of the
last operating mode will light up.
• Press and hold the BUTTON (#6) on the main unit or press the
BUTTON (#1) on the remote control to switch the main unit back to Standby
mode. The STATUS INDICATOR (#7) will light up red.
• Set the POWER ON/OFF SWITCH (#12) to OFF position if you want to switch the
JSBW-750 off completely.
Note : When the soundbar is idle or there is no any input for 60 minutes, it will
automatically switch to Standby mode.
Select Modes
Press the audio source buttons (BT (#14), OPTICAL (#3), COAX (#2), AUX/RCA
(#13) on the remote control to enter the relevant mode directly.
Or you can also short press the
BUTTON (#6) on the main unit repeatedly
during ON mode, the play mode will be changed circularly between Bluetooth
mode, Optical input mode, Coaxial input mode and Aux-in/RCA mode, meanwhile,
the STATUS INDICATOR (#7) will lights in different colour:
Blue=Bluetooth mode
Cyan=Optical input mode
Pink=Coaxial input mode
Green=AUX/RCA input mode