User's Manual


E‐10
OPTICAL/COAXIAL (DIGITAL INPUTS) OPERATION
1. Ensure that the unit is well connected to the TV or other audio device via
Optical or Coaxial cables (not included).
2. Turn on the soundbar, press the
BUTTON (#6) on the main unit repeatedly
or press the OPTICAL BUTTON (#3) or COAX BUTTON (#2) on the remote
control to select the relevant OPTICAL or COAXIAL mode.
3. Operate your audio device directly for playback features.
4. Press “▲” / “
” BUTTON (#12/10) on remote control or tap the “+”/ “-” BUTTON
(#5/4) on the main unit until you reach a comfortable listening level.
NOTE : If there is no sound come out from the soundbar and the status indicator
light flashes quickly, Make sure the audio (digital output) setting of your
source player (e.g. TV, DVD player, game player) is set to PCM.
AUX/RCA OPERATION
1. Ensure that the unit is well connected to the TV or other audio device via the
accompanied 3.5mm-RCA cable.
2. Turn on the soundbar, press the
BUTTON (#6) on the main unit repeatedly
or press the the AUX/RCA BUTTON (#13) on remote control to select the
AUX/RCA input mode.
3. Operate your audio device directly for playback features.
4. Press “▲” / “
” BUTTON (#12/10) on remote control or tap the “+”/ “-” BUTTON
(#5/4) on the main unit until you reach a comfortable listening level.
Note:
• If you want to play it via RCA LINE-IN JACKS (#8), make sure the AUX-IN
JACK is unlugged.
• If you connect the soundbar to the Line-Out Jack of your external device, you
only need to adjust the volume control of your soundbar. If you connect to the
headphone jack of your external device, you may need to adjust both the
volume controls of your external device and the soundbar to obtain the desirable
listening level.
• Remember to turn off the
soundbar when you have finished listening. Don't
forget to switch off the power of your external audio device as well.