User's Manual


E‐9
BLUETOOTH OPERATION
Pairing a Bluetooth enabled device with the soundbar.
1. Turn on the soundbar, select BT mode. The STATUS INDICATOR (#7) will light
up Blue and flash.
2. The soundbar will go into Pairing/Discoverable mode.
3. Turn on the Bluetooth function for the device you want to link to, and enable the
search or scan function to find the soundbar.
4. Select " MW-1481" from the device list when it appears on your device screen.
If required, enter the pass code “0000” to pair (link) with your device.
5. If you are pairing (linking) your computer to the speaker using Bluetooth, you
may need to set the soundbar as your computer’s default sound device.
6. After successfully pairing the soundbar with your Bluetooth device, The
STATUS INDICATOR (#7) will stop flashing and remain lit.
7. If you want to pair (link) the soundbar with another Bluetooth device, press and
hold
the PAIR BUTTON (#6) on the remote
a few
seconds. The
STATUS
INDICATOR (#7) will flash. The soundbar will go into Pairing/Discoverable
mode. Repeat steps 3 & 4.
Now you can play music from your Bluetooth device wirelessly to the soundbar.
1. Select your favorite song, press the
Play/Pause
on your Bluetooth device or the
Play/Pause
BUTTON (#5)
on the soundbar to play or pause the song from
your Bluetooth device.
2. Press the Skip Forward
BUTTON (#11) or Skip Backward BUTTON
(#4) to select the Next or Previous track.
3. Press “▲” / “
” BUTTON (#12/10) on remote control or tap the “+”/ “-” BUTTON
(#5/4) on the main unit and adjust the volume control of your Bluetooth device
until you reach a comfortable listening level.
Note :
1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth
enabled devices for Bluetooth operation since it may vary from model to
model.
2. If your Bluetooth enabled device does not support A2DP profile, it will not play
the music through the speaker, even if paired (linked).
3. Remember to turn off the soundbar when you have finished listening,
4. Don't forget to switch off the power of your Bluetooth device as well.
5. The music playback will automatically be paused when you have an incoming
call. When the call is ended, the soundbar will start playing again.